1. Selection of die forging process
The same forging can be manufactured on different equipment using different processes. The economic effect is also different due to the different technological equipment (equipment and mold shell, etc.) used in different technological schemes. When the production batch is large, die forging hammer or hot die forging press can be used; If the batch is not too large, screw press can be used or in the free forging hammer tire die forging and fixed die forging. No matter what kind of process must ensure the quality requirements of forgings, the selection of process scheme must also consider the specific conditions of the factory, try to choose a reasonable process scheme according to the current equipment situation of the factory.
2. Selection of die forging method
Die forging method is different methods that can be used in the production of forgings on some equipment, such as single die forging, turn die forging, one fire more than one piece, one die more than one piece, joint forging and so on. Reasonable selection of die forging method can increase die forging productivity, simplify die forging steps and reduce material consumption.
(1) single die forging for die forging hammer, hot die forging press, screw press die forging, usually a blank shake forging only one forging, especially the larger forgings are single die forging.
(2) The cutting length of the inverted die forging blank can be used for forging two forgings. The blank is heated as a whole. After the forging of the first forging, the blank is turned 80% and the forgings are clamped with pliers, and the remaining blank is forged with another forging. The method can omit the clamp head and callis for high productivity. The method is suitable for the medium and small forgings with a single forgings weight of 2~3kg and length of no more than 350mm, otherwise the forging and cutting are inconvenient and labor-intensive. For slender, flat and thin forgings with a drop, it is not appropriate to use the head die forging, because in forging the second will make the clamping of the first forging deformation.
(3) a fire with a heated bar continuous forging several forgings, each forging after a forgings separated from the bar, and then another forgings. One fire is the common forging method of die forging on flat forging machine. The forgings with bars are cut and the hollow forgings are perforated to separate the forgings. The hammer fire multiple die forging method is used to cut the forging by cutting die.
(4) more than one die forging several forgings in the same module at a time. It is suitable for small forgings with weight less than 0.5kg and length less than 80mm. The number of die forging pieces at the same time is generally 2? 3 pieces a die can greatly improve productivity, but the position accuracy between several final forging die bore should be more strict requirements.
(5) Forging will be two different forgings together at the same time forging, and then separate the forging method is called forging. Forging can make forging easy to form, save metal, reduce mold variety, improve production efficiency.